2024 Land Pride RCR25 Series RCR2596 - PULL

Information

2024 Land Pride RCR25 Series RCR2596 - PULL

Land Pride's standard utility duty RCR25 Series Rotary Cutters provide excellent cutting performance on gently sloping or slightly contoured right-of ways, pastures, set-aside-acres, and row crop fields. Their 2" to 12" cutting height and ability to cut weeds and brush up to 1" diameter make them well suited for these applications.

Features may include:

QUICK-HITCH COMPATIBLE

Our Quick-Hitch System allows you to quickly connect and disconnect from the implement - most without leaving the tractor seat. This is a real time saver when working on multiple projects.

GEARBOX WARRANTY

5 Year Limited Gearbox Warranty demonstrates our confidence in the gearbox's quality and lasting performance.

1-1/2" CUTTING CAPACITY

These cutters offers 1-1/2" cutting capacity. See Operator's Manual for more information.

SKID SHOES

Full length skids with replaceable shoes adds reinforcement to side panelsand allows for change before wearing through to weld-on piece.

Photos

Highlights

  • Jewell, Kansas
  • 2024
  • Land Pride
  • RCR25 Series RCR2596 - PULL
  • Available
  • Cutting: 2-12 inches (5.1-30.5 cm)

Specifications

  • 2024
  • Land Pride
  • RCR25 Series
  • RCR2596 - PULL
  • Rotary Cutters
  • Tractor rating: 40-110 hp (29.8-82 kW)
  • 80-90w EP
  • horsepower rating: Center - 100 hp (74.6 kW) Outboard 60 hp (44.7 kW) | Speed up beveled gears: 540 rpm or 1000 rpm power take-off driven gearbox Cast iron housing, beveled gears | Input/ output shaft size: Input shaft = 1 3/4" - 20 spline Output shaft = 2" dia.
  • Cat 4, w/equal angle u-joint | protection: 2 plate slip clutch
  • Tailwheel option Lift-type (2 ea.): 6" x 9" x 21" Laminated or 24" recap aircraft tires
  • Blade tip: 540 rpm 14,592 fpm (71.1 mps)
  • Lift-type Category 1 & 2 Quick-Hitch adaptable Pull-type - w/dual level rods
  • Cutting capacity: 1 1/2 (3.8 cm) | Stump jumper: Round pan 3/16 inches (5 mm) | Blades (2): 1/2" x 4" Heat treated / Free-swinging suction blades
  • 7'-10" inches (2.39 m)
  • 8'-3 3/4" inches (2.54 m)
  • 12'-1/4" inches (3.66 m)
  • 9 5/8" inches (24.4 cm)
  • Cutting: 2-12 inches (5.1-30.5 cm)
  • Gearbox oil End boxes capacity T-box: 2.5 pints (1.18 L) 4.5 pints (2.13 L)
  • Machine (With front and rear chain shields): 1,665 lbs (755 kg) | Pull type tongue: 651 lbs (295 kg)
  • Skids: Replaceable | Blade bolts: Keyed with harden flat washer and locknut
  • 10 gauge (3.4 mm) |side skirt: 3/16 inches (5 mm)