2024 Land Pride RCF2784 Series RCF2784 - PULL

Information

2024 Land Pride RCF2784 Series RCF2784 - PULL

Land Pride's RCF2784 Rotary Cutters are heavy-duty smooth top versions of the RCR26 Series. The 84" width helps you tackle small trees up to 3" in diameter, as well as grass, weeds, crops and brush.

Features may include:

QUICK-HITCH COMPATIBLE

Our Quick-Hitch System allows you to quickly connect and disconnect from the implement - most without leaving the tractor seat. This is a real time saver when working on multiple projects.

GEARBOX WARRANTY

5 Year Limited Gearbox Warranty demonstrates our confidence in the gearbox's quality and lasting performance.

3" CUTTING CAPACITY

These cutters offers 3" cutting capacity. See Operator's Manual for more information.

SKID SHOES

Replaceable bolt-on skid shoes provide sidewall reinforcement and protection to the bottom of sidewall.

LAMINATED TAILWHEEL

The laminated tailwheel is long lasting in rough conditions and 1-1/2" heavy-duty spindle protects the assembly.

Photos

Highlights

  • Jewell, Kansas
  • 2024
  • Land Pride
  • RCF2784 Series RCF2784 - PULL
  • Available
  • Deck (bottom of deck to bottom of skid shoe): 9 7/8 in (25.1 cm) | Cutting: 1 1/2 in (3.8 cm) to 12 in (30.5 cm)

Specifications

  • 2024
  • Land Pride
  • RCF2784 Series
  • RCF2784 - PULL
  • General
  • Recommended tractor: 60-130 hp (44.7-96.9 kW)
  • 1:1.21
  • ASAE Category 4 | protection: 4 Plate slip clutch
  • Tailwheel mount: Welded A-arm and caster fork with 360 degree swivel | Tailwheel: Laminated tire with cast iron hub
  • Power take-off: 540 rpm | Blade tip: 14,369 fpm (73 mps)
  • 3-Point: Category ll & IlI with floating top linkage, quick hitch adaptable
  • Deck material: 10 ga (3.4 mm)
  • Cutting capacity: 3 in (7.6 cm) Diameter | Gearbox construction: 1 3/8 in (3.5 cm) - 6 spline input shaft and 2 in (5.1 cm) output shaft| Side skirt material thickness: 1/4 in (6 mm) | Skid shoes: 1/4 in (6 mm) | Stump jumper: 3/16 in (.5 cm) x 24 in (61 cm) x 38 in (96.5 cm) Oval pan with 1 in (2.5 cm) thick blade holder bar | Blades (2): 1/2 in (1.3cm) x 4 in (10.2cm) x 31 in (78.7cm) | Tailwheel: 4 in (10.2 cm) x 8 in (20.3 cm) x 15 in (38.1 cm)
  • 84 in (2.13 m)
  • 89 in (2.26 m)
  • 3-Point single tailwheel: 132 1/2 in (3.37 m) / 3-Point dual tailwheel: 130 3/8 in (3.31 m)
  • Deck (bottom of deck to bottom of skid shoe): 9 7/8 in (25.1 cm) | Cutting: 1 1/2 in (3.8 cm) to 12 in (30.5 cm)
  • 6.5 Pints
  • Machine 3-Point single tailwheel: 1,225 lbs (556 kg) with front & rear chain guards / 3-Point dual tailwheel: 1,298 lbs (589 kg) with front & rear chain guards
  • Skid shoes: thick bolt-on replaceable skid shoes | Blade bolts: Keyed with harden flat washers & locknuts. | Rear guard: Metal band
  • Gearbox construction: Speed-up beveled gears, cast iron housing | Deck: All welded deck
  • Gearbox: EP 80-90W gear lube