2024 Land Pride RC5715 Series RC5715

Information

2024 Land Pride RC5715 Series RC5715

The RC5715 is Land Pride’s new heavy-duty 15' double-deck rotary cutter designed to make right-of-way and roadside maintenance a simple and efficient task and comes with 4 patented features. The RC57 also features greaseless pivot points, endcap grease zerks, easy-off shields, and a patented sliding guard over the splitter gearbox, making maintenance easy to perform.

Features may include:

GEARBOX WARRANTY

7 Year Limited Gearbox Warranty shows confidence in gearbox integrity.

SLIDING GUARD

Easy-off shields and a patented sliding guard over the splitter gearbox make maintenance easy to perform.

PARALLEL PIVOT AXLE

Patented parallel pivot axle gives you unmatched ground contact for improved holding power on hills and inclines.

FLIP SPACERS

Patented convenient flip spacers speed height adjustment and eliminate the need for donut-style spacers which can easily be lost.

DECK ARMOR™

Patented Deck Armor™ is an additional layer of steel which increases durability reducing the possibility of deck damage from blade to deck contact without reducing cut quality.

REPLACEABLE SIDE SKIRTS & SKID SHOES

Damaged side skirts are easily replaced. Replaceable skid shoes are full length and constructed of high-tensile AR400 steel for durability.

HOSE HOLDERS

Color coded hydraulic hose handles provide easy hose identification. Tongue-mounted hose holder keeps hose tips out of the dirt.

FULLY WELDED

Double deck wing-to-wing (10 gauge over 7 gauge), fully welded.

HITCH

Self-leveling Performance Hitch™ with holding pin reduces drawbar wear and allows for one person hook-up.

SAFETY LIGHTING

LED lights are bright, long lasting and resistant to vibration, unlike the incandescent lights.

Photos

Highlights

  • Jewell, Kansas
  • 2024
  • Land Pride
  • RC5715 Series RC5715
  • Available
  • Cutting: 1-1/2" - 16" (3.8 cm - 40.6 cm) - Varies by tire option.

Specifications

  • 2024
  • Land Pride
  • RC5715 Series
  • RC5715
  • Rotary Cutters
  • horsepower range: 60 - 250 hp (44.7 - 186.4 kW)
  • Gearbox: Gear Lube 80-90W EP
  • Input 540 & 1000 rpm: Cat. 6 with constant velocity u-joint with or without over-running clutch. | Intermediate: Category 5 with slip-clutch. | Wing: Category 4 with slip-clutch or Category 5 with slip-clutch.
  • horsepower: 250 hp (186 kW) Divider and 225 hp (168 kW) Center & Wings
  • Number of: 6 - Wheel option: Four on transport axle and one on each wing axle. / 8 - Wheel option: Four on transport axle and two on each wing axle. | 21" (53.3 cm) or 26" (66 cm) Laminated tires. / 24" (61 cm) Used aircraft, foam filled tires. / 25.5" (64.8 cm) 20 ply tires, foam filled or pneumatic. / 29" (73.7 cm) Used aircraft tires.
  • Gearbox horsepower: 540 rpm or 1000 rpm | Blade tip - At 540 rpm: Center Blades & Wing Blades = 16,400 FPM (83 mps) / At 1000 rpm: Center Blades = 16,400 FPM (83 mps) & Wing Blades = 16,000 FPM (81.3 mps)
  • Constant Level Swivel Clevis Hitch, LP Performance HitchTM, Self Leveling Bar-Tite Hitch, Ball Hitch, or Constant Level Pintle Hitch.
  • tongue: 5" x 3" (12.7 cm x 7.6 cm) rectangular tubing.
  • Signal: LED / Seven pin connector: SAE J560 pin configuration
  • Cutting capacity: 5" (13 cm) | LP Performance Hitch & BarTite hitch pivot shaft diameter: 2 1/4" (5.7 cm) | Lift hydraulics: 3 1/2" x 8" hydraulic cylinder, hoses, fittings & flip-over spacers | Wing flex while operating: Max. 20° down, Can float up as needed as long as the wheel(s) are still on the ground. | Wing hydraulics: 3" x 12" hydraulic cylinders, hoses & fittings. | Blades - 6 (2 per carrier): 1/2" x 4" (1.3 cm - 10.2 cm) Heat-treated, free-swinging alloy steel with uplift. | Blade overlap: 6" (15.2 cm)
  • 15'-0" (4.57 m)
  • 16'-0" (4.88 m)
  • with 21" tires: 10'-3" (3.12 m) - Single-acting fold option, 7’-3" (2.21 m) - Dual-acting fold option.
  • 16'-3" (4.95 m) - With center deck raised fully up.
  • 12" (30.5 cm)
  • Cutting: 1-1/2" - 16" (3.8 cm - 40.6 cm) - Varies by tire option.
  • Gearbox: Splitter: 5.5 pints (2.6 L); Center deck & Wings: 12.4 pints (5.87 L)
  • Wing transport protection: Wing Transport Lock Pin. | Wing deck skid shoes: Each wing has one leading hardened beveled skid shoe and one trailing standard beveled skid shoe. Both are reversible and replaceable. | Center deck skid shoes: Two replaceable beveled skid shoes and multiple mounting locations. | Blade bolt: Keyed with hardened flat washer & locknut. | Stump jumper / blade holder options: Forged blade bar without the dish pan. / Thick 3/16" (5 mm) round dish shaped pan, reinforced with the forged blade bar. / Thick 3/16" (5 mm) round dish shaped pan, reinforced with the heavy duty blade plate. / Stacked blade shredder Kit without the dish pan. | Transport axle: Many configurations to choose from.
  • Machine: 5,880 lbs (2667 kg) | Tongue: 2,226 lbs (1010 kg) with wings down.
  • thickness: Top deck plate = 10 Gauge (3.4 mm); Bottom deck plate = 3/16" (5 mm)
  • Side skirt: Removable/replaceable 1/4" (6 mm) steel.
  • Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" (4.4 cm) shafts.