2024 Land Pride RC2515 Series Base

Information

2024 Land Pride RC2515 Series

Land Pride's RC2515, a 15' version of our popular 12' medium-duty Rotary Cutter, is an economical solution for general grass cutting needs. The Land Pride gearboxes feature a 1-5/8" output shaft and stout lower bearings. The gearboxes are driven by a constant velocity Cat. 4 main driveline and Cat. 3 connecting drivelines with slip-clutch protection on all three. The ride is cushioned by a deck-mounted spring and can be enhanced with optional 29" used aircraft tires -- either 4 or 6 per cutter.

Features may include:

GEARBOX WARRANTY

5 Year Limited Gearbox Warranty demonstrates our confidence in the gearbox's quality and lasting performance.

1-1/2" CUTTING CAPACITY

These cutters offers 1-1/2" cutting capacity. See Operator's Manual for more information.

LED SIGNAL LIGHTS

LED lights are bright, long lasting and resistant to vibration, unlike the incandescent lights.

SMOOTH TOP DECK

10 Gauge smooth top deck reduces accumulation of debris and is easier and faster to clean.

SLIP CLUTCH PROTECTION

All three connecting drivelines offer two-plate slip clutch protection.

WING LEVELING

Wings are leveled with easy-to-access and easy-to adjust turnbuckles.

SPRING CUSHION

Deck-mounted spring cushion provides a smooth ride in rough terrain.

Photos

Highlights

  • Jewell, Kansas
  • 2024
  • Land Pride
  • RC2515 Series Base
  • Available
  • Cutting: 2" to 13" (5 cm to 33 cm)

Specifications

  • 2024
  • Land Pride
  • RC2515 Series
  • Base
  • Rotary Cutters
  • Tractor: 50-100 hp (37-75 kW)
  • horsepower splitter: 160 hp (119 kW) / center & wings: 100 hp (75 kW) | hafts input shaft: 6 Spline
  • Input: ASAE Category 4 with constant velocity u-joint | Intermediate & wing: ASAE Category 3 with slip-clutch
  • 29" Used aircraft tires or 21" laminated | Number of: 4 or 6 Total
  • Blade tip at 540 rpm: Center blades & wing blades = 14,963 fpm (76 mps)
  • Pull-type hitch & clevis
  • Signal lights 7 Pin connector: LED SAE J560 pin configuration
  • Gearbox shafts input shaft: 1 3/8" / output shaft: 1 5/8" | Cutting capacity: 1 1/2" (3.8 cm) | Lift hydraulics: 2 1/2" x 8" hydraulic cylinder, hoses, fittings & stroke control spacers | Wing hydraulics: 2 1/2" x 10" hydraulic cylinders, hoses & fittings | Wing flex while operating: Max. 20° down, can float up as needed as long as the wheel(s) are still on the ground. | Side skirt material: 1/4" (6 mm) | Blades - 6 (2 per deck): 1/2" x 4" (13 mm x 10.2 cm) Heat treated free swinging alloy steel with up lift | Blade overlap: 6" (15 cm) | Stump jumper / blade holder: 10 Gauge (3.4 mm) round dish shaped pan, reinforced with 1" x 4" (2.5 cm x 10.2 cm) blade bar
  • 15' - 0" (4.57 m)
  • 15' - 7" (4.75 m)
  • Normal: 10' - 2 1/2" (3.11 m) With transport locks set and cutter blade 13" (33 cm) off the ground. / Minimum: 8' - 4" (2.54 m) With transport locks set and cutter blade 2" (5 cm) off the ground.
  • 15' - 2" (4.62 m) With laminated tires / 15' - 5 1/2" (4.71 m) With aircraft tires
  • 11 1/4" (29 cm)
  • Cutting: 2" to 13" (5 cm to 33 cm)
  • Gearbox capacity & lubrication splitter: 4.5 Pints (2.13 L) of gear lube 80-90W EP / center & wings: 5.75 Pints (2.72 L) of gear lube 80-90W EP
  • Wing transport protection: Wing transport locks | Skid shoes: Wing Deck: 1 replaceable shoe per wing / Center Deck: 2 replaceable shoes | Blade rotation left wing: Clockwise / center deck: Counterclockwise / right wing: Counterclockwise | Blade bolt: Keyed with hardened flat washer & locknut | Front & rear guards: Single chain or rubber | Transport axle: Spring-cushioned lift cylinder
  • Hitch: 1,022 lb (464 kg) | Machine: 3,202 lbs. with chain guards & four laminated tires.
  • 10 Gauge (3.4 mm) deck
  • Side skirt: Plate
  • Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" shafts.